Xtool X100 PAD2 Pro with KC100 Key Programmer FAQs

Xtool X100 PAD2 Pro full version adds VW 4th/5th generation immobilizer programming. It’s a professional key programmer for workshop with special functions. Here share the related FAQs and answers incl. key programming, mileage adjustment and common errors.

1.Key programming:

Q1: Does x100 pad2 pro support key programming for Renault clio4 and megane 3? And program code for Dacia sandero 2011?

A1: It can support Clio 4 till year 200 and megane 3 till year 2008. But Dacia sander is not covered.

Q2: Is possible to use xtool x100 pad2 pro to program card key on Renault (capture, clio 4 and megane)?
A2: It cannot support the new models after year 2009. You can try on the cars before 2009.

Q3: Can x100 pad2 pro support key programming for 09 Audi A4 2.0t cabriolet convertible Quattro?
A3: It depends on the IMMO generation.

 

Q4: Can I program new key to 2005 Dodge Caravan by X100 PAD2 PRO?
A4: Yes, the car model is covered.

Q5: Does X100 PAD2 PRO support Toyota Aqua 2014 all keys lost?
A5: Toyota Immobilization is covered. Select the key type based on your car.

Q6: It prompted “program failure” when program key to Renault Duster 2013, is the car not supported by X100 PAD2 PRO?

A6: Nissan car is supported, but you need to program from the key type option.

2.Mileage adjustment:

Q1: Can I adjust mileage to higher or lower kilometer by x100 pad2 pro?
A1: Yes.

Q2: I have a 2012 landrover evoque, can I use xtool x100 pad2 pro to correct odometer on it?
A2: Yes. You can select the “LANDROVER EVOQUE 2011-” option on the device.|

 

3.Error:

Q1: There is something wrong with the battery of my x100 pad2 pro. The battery will run out at the same day after recharging.
A1: You can return it to dealer to change new battery.

Q2: After upgrade X100 PAD2 PRO, all the VW function list appears in the menu of Bentley software, and i cannot use the bugatti diagnostic menu.


A2: The function lists of VW, AUDI and Bentley are same. Just operate by selecting the corresponding function is ok.

Q3: It shows “2004-2015 Failed to connect” when I program my chevy 2000 by x100 pad2 pro. Even if change the cable!

A3: You’d better to check if the connection is normal, and make sure select correct car functionality. Your car year is 2000, but you select is 2004-2015, so it failed.

Q4: When I use X100 PAD2 PRO tablet, it prompts “Not enough storage space is available!” as shown in the figure



A4: Please stop upgrading diagnostic vehicle software! The memory of X100 PAD2 PRO is limited, reduce or stop upgrading unnecessary diagnostic models.

Q5: The X100 PAD2 Pro shuts down automatically after I boot and log in.
A5: The tablet is locked, and it needs to remote flash the O.S system.

To be continued…
Buy Xtool X-100 PAD2 Pro:
http://www.obdiitool.co.uk/wholesale/xtool-x100-pad2-pro-full-version.html

Xtool X100 Pro2 Update Solved Error “Result is null or empty"

If an error message with “Result is null or empty” appears on Xtool X100 Pro2 auto key programmer when you update, how to solve?

Solution offered by obdiitool.co.uk engineer:
The reason for this error is that you use a wrong upgrade tool. Please install the correct X100 PRO2 upgrade tool as below.
Step 1: Enter XTOOL official website: http://www.xtooltech.com/EN/Index.html
Step 2: Click “Service& Support”-> “Download Upgrade Tool”-> “X100Pro2”

Step 3: Extract the installation package into an upgrade tool


Step 4: Connect X100PRO2 to Windows computer with Type-c cable;
Step 5: Open the upgrade tool-> input the Product SN and Password, then click login (Certificate of conformity with S / N and password)


Step 6: Select the required language upgrade

Note: Don't create an account when you get the X100 pro2 diagnostic tool.
Please log in directly with SN number and password (in "About" option of setting part) in our device. Dealer Code is XT0240 from obdiitool.co.uk.


Tech support: http://www.obdiitool.co.uk/

xtool x100 pro 2 review Free shipping in UK

X100 Pro2 includes functions of key programming and dashboard recovery. It is an upgraded version of the X100 PRO. This equipment is anti-seismic and durable which can meet the actual needs of different users such as automobile repair plants and fast repair shops.

Update website

website:http://www.xtooltech.com/EN/ProductView/X100Pro2.html.

X100 Pro vehicle coverage:

Asia: Toyota; Honda; Song Mazda; Lexus; Mazda; Nissan; Infiniti Mitsubishi Subaru Suzuki; Kia; Hyundai; Ssangyong QNLUTUS; Mitsuoka 2.
Europe: Audi; Volkswagen Skoda seat; Porsche Opel Citroen Peugeot Jaguar Land Rover; Renault Benz Ferrari Fiat Maserati MG; Smart; DS
3. United States: Lincoln; General Motors Chrysler Ford
4.China: Changan; Changfeng Changhe Chery Glorious; BYD; Huapu Jianghuai; Lifan Great Wall; HNMAZDA; Lu Feng Roewe; SQYL; ZZNISSAN; Luxembourg Geely Red Flag Huatai Pentium BAIC Baojun Fengshen Dfliuzhou; Betpurn

parameter:

Display: 320 * 480 dpi TFT color display
Working voltage: 9V-18V
Operating temperature: -10 to 60 ° C
Storage temperature: -20 to 70 ° C
Appearance size: (L * W * H): 92 * 33 * 200mm

The package includes:
1PC x HONDA-3
1PC x OBDII-16
1PC x Kia HYUNDAI-10
1PC x KIA-20
1PC x EEPROM
1PC x EEPROM adapter
1PC x power adapter 12V 1A
1PC x main cable
1PC x micro USB cable
1PC x US Power Adapter
1PC x EU Power Adapter
1PC x plastic box......

xtool x100 pro 2  function:

1. New button programming

2. Read the key from the memory of the immobilizer

3. New immobilizer programming

4.EEPROM programming

5. New mechanical key number programming

6. Vehicle identification code programming

7. Reset mileage

8. Easy to operate guide menu programming

9. New remote programming

10. Have a complete and powerful database of the most important vehicles

11.Upgrade via web-based download


Real Review of xtool x100 pro 2 from OBDIITOOL.co.uk:

Customer one he said that:

This is a good product, but does not perform ECU or BCM programming, which is what I was looking for. Most of its operations can be purchased with inexpensive non-tablet handheld scanners. The rugged shock hood looks great, and it will come in handy if you work in a store and accidentally drop it.



Customer two he said that:

This is the ideal tool for locksmiths if you lose your car keys, or it will cost you about 500 Euros to have a dealer do this, so using this device for a self-check will save you $ 300 and about the device also has the old 2 scanners On some models you can adjust the mileage. Overall, this is a great product and it does a great job.



Customer Three  he said that:

Works like a charm. First attempt at programming an aftermarket key for the 2014 Lexus Rx350. I see that it is even capable of mileage adjustment. Butxtool x100 pro  didn't work on my 2011 Toyota Avalon. It's not even connected. I don't know how it works and programs for 2014 Lexus (not 2011 Toyota Avalon). This is a good choice?

Customer four  he said thatL

I was impressed with the ability to program the 3 aftermarket keys of my 2009 Outback XT without asking for immobilizers or instruction codes. I haven't tried to update it yet and it's easy to use. Thank you!

Customer five  he said that:

xtool x100 pro 2 provides many functions, including odometer maintenance and throttle body re-learning procedures. However, many of these features are available on newer models in 2012 and later. It's very easy to register and update. After xtool x100 pro 2 completing the first set of updates, a few days later, when they were available, it automatically prompted me for the next update. Overall, I like this product, but it doesn't have the key programming features that are critical to my store，So I had to return.

Customer six  he said that

 I prefer the compact X100 pro 2, but please note that you should not create an account when obtaining this X100 pro diagnostic tool. To use the device provided by obdiitool.co.uk, log in using the SN number and password (in the "About" option in the settings section).

Get xtool x100 pro 2 shipping from UK: 

http://www.obdiitool.co.uk/wholesale/xtool-x100-pro2.html

What is the difference between XTOOL PS90 and Autel DS708？

Today's focus :

Today we take a look at the performance comparison between XTOOL PS90 and Autel DS708.

Autel DS708

XTOOL PS90 

When you are hesitant about which one you should have ?

Nothing, I have listed the clear table:

	XTOOL PS90	AUTEL DS708
Supported vehicles	32	46
Supported function	Besides diagnose, also support key, IMMO,News tooth learn, ABS exhaust, support battery replacement set, ECU resetting, exhaust after treatment, electronic steering and so on	Mainly for diagnose
Language	English only	English, French, Spanish, Portuguese, German
Update	online update	online update

If you like a little more features, then you choose XTOOL PS90, but it only 

supports English, if you only use it for diagnosis, then AUTEL DS708 is enough, 

and it supports more languages and supports more models.

XTOOL PS90 support models and technical details:

http://www.obdiitool.co.uk/wholesale/original-xtool-ps90-vehicle-diagnostic-tool.html

AUTEL DS708 support models and technical details: http://www.obdiitool.co.uk/wholesale/autel-maxidas-ds-708.html

More Xtool:http://www.obdiitool.co.uk/

Program VW CC 2014 Key Steps by Xtool X-100 PAD2 Pro

 This post comes with the guide to use it to add new key to VW CC 2014 by PIN code. Xtool X-100 PAD2 Pro full version adds VW 4^th & 5^th IMMO.

Preparation:

Xtool X-100 PAD2 Pro full Configuration (€813.64 free shipping from UK)

http://www.obdiitool.co.uk/wholesale/xtool-x100-pad2-pro-full-version.html

This is comfort control module EEPROM chip of VW CC 2014

Reading EEPROM chip

Prepare two keys: Original one+ blank one

Test two key first

The original key can remote and start the car

The blank key cannot work

Main 4 steps to program key:

Step 1: Get pin code

Step 2: Generate 48 dealer key

Step 3: Match new key

Step 4: Program remote

In detail…

Step 1: Get pin code

Connect X100 PAD2 PRO with KC100 to the vehicle

Insert the original key into ignition

Press X100 PAD2 on the device

Select Immobilization-> VW-> 4^th& 5^th Immobilizer system、

Turn on ignition switch

Select 4^th immobilizer system-> VW Passat/CC (Recommend) -> Get PIN/CS

Follow the prompt to select EEPROM data

Codes will be extracted from EEPROM chip dump file

Step 2: Generate 48 dealer key

Select Generate 48 dealers key to activate KC100 adapter

Then input CS code

Put the blank key to coil

Generate 48 dealer key successfully

Step 3: Match new key

Select Match the key

Enter Pin code and learning key number

Enter the learning mode after confirm immo, use each matched key to turn on ignition switch

Match new key succeed

The original key and new key both can start the car, but the new key cannot remote

Step 4: Program remote

Select Program remote

Turn on ignition switch

Select 46 Central comfort module (CANBUS) -> Erase remote

Erase remote success

Then select Program remote

Press any key of the remote to add once program completed

Finally, the new key is working.

FYI…

Here is the full vehicle coverage by Xtool X100 PAD2 Pro.

Note: It cannot support India vehicles.

Check detail car model list, please visit official site: http://www.xtooltech.com/EN/ProductView/X100PAD2PRO.html

What is the difference between Xtool X-100 PAD2 and Xtool X-100 PAD? Which one is more worth buying?

  Users who have used Xtool X-100 PAD should know that there is such a guy who is awesome, What are the improvements in the new version Xtool X-100 PAD2？

Xtool X-100 PAD

Xtool X-100 PAD2

  you maybe  know where to put your eyes because the  appearance .Take it easy ,Let 's take a

 look at the features. I have made a list.

Difference Between  Xtool X-100 PAD and  Xtool X-100 PAD2

  How to use  Xtool X-100 PAD2 ?

Xtool X-100 PAD2 purchase address：http://www.obdiitool.co.uk/wholesale/xtool-x100-pad2-pro-full-version.html

Xtool X-100 PAD purchase address:http://www.obdiitool.co.uk/wholesale/new-xtool-x100-pad-key-programmer.html

 More xtool product:http://www.obdiitool.co.uk/search/?q=Xtool&DirID=

How to use XTOOL X100 PAD 2  ?

  you like to machines that I use from key programming  Bought from www.obdiitool.co.uk.

I have the XTOOL X100 PAD 2 so basically the way I set these up here is

where you can actually see how they actually work differently and at different settings.

First,udate these software:

  You can see a lot of features here in XTOOL X100 PAD 2.wireless keys and it does the keys with the blade itself. so what programs both this one only programs just the regular blade keys programs . X tool is basically you got immobilizer abdominal adjustment common diagnosis.

 Has so basically my experience using this one to program regular keys has worked out flawlessly this one has programmed regular keys quickly.

   

   you program the keys within this slot and that's how you program it ok.

You don't need any arm base to program ,this programs wirelessly to the system wirelessly as you're sitting in the car all the remotes work

 

  He's great, man, you can afford this three hundred, it's only three hundred plus twelve dollars.

Now it seems that there is an improved version, you can see:

http://www.obdiitool.co.uk/wholesale/xtool-x100-pad2-pro-full-version.html